AM26LS31 ANSI TIA/EIA-422-B ITU CCITT V.11 G;

OPA350 CMOS 5nV/Hz 38MHz, 22V/s A/D PA 75 ; OPA350 2.5V 300mV 300mV 10k 10mV ; OPA350 OPA2350 MSOP-8 SO-8 DIP-8 OPA4350 SSOP-16 SO-14 -40C 85C -55C 150C

These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage BI-FET II technology. They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The LF353-N is pin compatible with the standard LM1558 allowing designers to immediately upgrade the overall performance of existing LM1558 and LM358 designs.; These amplifiers may be used in applications such as high speed integrators, fast D/A converters, sample and hold circuits and many other circuits requiring low input offset voltage, low input bias current, high input impedance, high slew rate and wide bandwidth. The devices also exhibit low noise and offset voltage drift.

The ADC128S102 is a low-power, eight-channel CMOS 12-bit analog-to-digital converter specified for conversion throughput rates of 500 ksps to 1 MSPS. The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit. It can be configured to accept up to eight input signals at inputs IN0 through IN7.; The output serial data is straight binary and is compatible with several standards, such as SPI, QSPI, MICROWIRE, and many common DSP serial interfaces.; The ADC128S102 may be operated with independent analog and digital supplies. The analog supply V; can range from +2.7 V to +5.25 V, and the digital supply V; can range from +2.7 V to V; . Normal power consumption using a +3-V or +5-V supply is 2.3 mW and 10.7 mW, respectively. The power-down feature reduces the power consumption to 0.06 W using a +3-V supply and 0.25 W using a +5-V supply.; The ADC128S102 is packaged in a 16-lead TSSOP package. Operation over the extended industrial temperature range of 40C to +105C is ensured.

2

INA199 0.3V 26V 50V/V100V/V 200V/V 10mV ; 2.7V 26V 100A 40C 125C SC70-6 UQFN-10

SN65HVD2x RS-485 TIA/EIA 485-A SN65HVD2x ESD ; ; 5V

+/-15kV ESD 6

OPA140OPA2140 OPA4140 JFET V- JFET ADC DAC; OPA140 11MHz 20V/s 1.8mA 4.5V 36V 2.25V 18V ; 40C +125COPA140 5 SOT-238 VSSOP 8 SOIC OPA2140 8 VSSOP 8 SOIC OPA4140 14 SOIC 14 TSSOP