P6SMB47CA

P6SMB47CA © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/28/20 Agency Approvals Description The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Applications TVS devices are ideal for the protection of I/O Interfaces, V CC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Maximum Ratings and Thermal Characteristics (T A=25 OC unless otherwise noted) Agency Agency File Number E230531 P6SMB Series Bi-directional Uni-directional Functional Diagram Bi-directional Uni-directional Cathode Anode RoHS Pb e3 • 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Excellent clamping capability • Low incremental surge resistance • Typical I R less than 1μA when V BR min>12V • Optimized surface mount footprint for minimal PCB space impact • Low profile package • Typical failure mode due to exceeding maximum ratings is a short circuit condition • Whisker test conducted based on Table 4a and 4c of JEDEC JESD201A • IEC 61000-4-2 ESD 30kV(Air), 30kV (Contact) • EFT protection of data lines in accordance with IEC 61000-4-4 • Built-in strain relief • Fast response time: typically less than 1.0ps from 0V to V BR min • High temperature to reflow soldering guaranteed: 260°C/30sec • V BR @ T J= V BR@25°C x (1+ αT x (T J - 25)) ( αT:Temperature Coefficient, typical value is 0.1%) • UL Recognized compound meeting flammability classification V-0 • Meet MSL level1, per J-STD-020, LF maximun peak of 260 °C • Matte tin lead–free plated • Halogen free and RoHS compliant • Pb-free E3 means 2 ND level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01) • UL Recognized to ANSI/UL 497B: Protectors for Data Communications and Fire- Alarm Circuits. Parameter SymbolValueUnit Peak Pulse Power Dissipation (Fig.2) by 10/1000us Test Waveform (Fig.4) (Note 1),(Note 2) -Single Die Parts P PPM 600 W Peak Pulse Power Dissipation (Fig.2) by 10/1000us Test Waveform (Fig.4) (Note.1, Note.2) -Stacked Die Parts (Note.5) PPPM 800 W Power Dissipation on Infinite Heat Sink at T L=50 OC P D 5.0 W Peak For ward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 10 0 A Maximum Instantaneous For ward Voltage at 50A for Unidirectional Only (Note 4) VF 3.5/5.0 V Operating Temperature Range T J -65 to 150°C Storage Temperature Range T STG -65 to 175°C Typical Thermal Resistance Junction to Lead R ƟJL 20°C/W Typical Thermal Resistance Junction to Ambient R ƟJA 10 0°C/W Datasheet Additional Infomarion Resources Samples Notes: 1. Non-repetitive current pulse , per Fig. 4 and derated above T J (initial) =25 OC per Fig. 3. 2. Mounted on copper pad area of 0.2x0.2” (5.0 x 5.0mm) to each termi\�nal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for un\�idirectional device only, duty cycle=4 per minute maximum. 4. V F < 3.5V for single die parts and V F< 5.0V for stacked-die parts. 5. For stacked die component details, please refer to part numbers labeled\� by * in Electrical Characteristics. Surface Mount – 600W > P6SMB series TVS Diodes © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/28/20 Electrical Characteristics (TA=25°C unless otherwise noted) Part Number (Uni) Part Number (Bi) Marking Reverse Stand off Voltage V R (Volts) Breakdown Voltage V BR (Volts) @ I T Test Current I T (mA) Maximum Clamping Voltage V C @ I pp (V) Maximum Peak Pulse Current I pp (A) Maximum Reverse Leakage I R @ V R (µA) Maximum Temperature coefficient of V BR (%/C) Agency Approval UNI BI MINMAX P6SMB6.8A P6SMB6.8CA 6V8A6V8C 5.806.457. 1 4 10 10.5 58.110000.041 X P6SMB7.5A P6SMB7.5CA 7V5A7V5C 6.407. 1 37.88 10 11. 3 54.0 5000.054 X P6SMB8.2A P6SMB8.2CA 8V2A8V2C 7.027.798.61 10 12.1 50.4 2000.058 X P6SMB9.1A P6SMB9.1CA 9V1A9V1C 7.788.659.55 113.4 45.5 500.063 X P6SMB10A P6SMB10CA 10 A10 C 8.55 9.5010.50 114.5 42.1 100.066 X P6SMB11A P6SMB11CA 11 A11 C 9.4010.5011.60 115.6 39.1 50.069 X P6SMB12A P6SMB12CA 12A12C 10.20 11.4012.60 116.7 36.5 50.071 X P6SMB13A P6SMB13CA 13A13C 11. 1 0 12.4013.70 118.2 33.5 10.074 X P6SMB15A P6SMB15CA 15A15C 12.80 14.3015.80 121.2 28.8 10.076 X P6SMB16A P6SMB16CA 16A16C 13.60 15.2016.80 122.5 27.1 10.080 X P6SMB18A P6SMB18CA 18A18C 15.30 1 7. 1 018.90 125.5 24.2 10.083 X P6SMB20A P6SMB20CA 20A20C 1 7. 1 0 19.0021.00 127.7 22.0 10.085 X P6SMB22A P6SMB22CA 22A22C 18.80 20.9023.10 130.6 19.9 10.088 X P6SMB24A P6SMB24CA 24A24C 20.50 22.8025.20 133.2 18.4 10.091 X P6SMB27A P6SMB27CA 27A27C 23.10 25.7028.40 137.5 16.3 10.092 X P6SMB30A P6SMB30CA 30A30C 25.60 28.5031.50 141.4 14.7 10.093 X P6SMB33A P6SMB33CA 33A33C 28.20 31.4034.70 145.7 13.3 10.094 X P6SMB36A P6SMB36CA 36A36C 30.80 34.2037.80 149.9 12.2 10.096 X P6SMB39A P6SMB39CA 39A39C 33.30 37.1041.00 153.9 11. 3 10.097 X P6SMB43A P6SMB43CA 43A43C 36.80 40.9045.20 159.3 10.3 10.098 X P6SMB47A P6SMB47CA 47A47C 40.20 44.7049.40 164.8 9.4 10.099 X P6SMB51A P6SMB51CA 51A51C 43.60 48.5053.60 170.1 8.7 10.100 X P6SMB56A P6SMB56CA 56A56C 47.80 53.2058.80 177.0 7. 9 10 . 101 X P6SMB58A P6SMB58CA 58A58C 52.78 55.1060.90 179.8 7. 710 . 101 - P6SMB62A P6SMB62CA 62A62C 53.00 58.9065.10 185.0 7. 210.102 X P6SMB68A P6SMB68CA 68A68C 58.10 64.6071.40 192.0 6.6 10.103 X P6SMB75A P6SMB75CA 75A75C 64.10 71.3078.80 1103.0 5.910.104 X P6SMB82A P6SMB82CA 82A82C 70.10 77.9086.10 1113.0 5.410.105 X P6SMB91A P6SMB91CA 91A91C 77.80 86.5095.50 1125.0 4.910.106 X P6SMB100A P6SMB100CA 10 0 A10 0 C 85.50 95.00105.00 1137.0 4.510.106 X P6SMB110A P6SMB110CA 110 A110 C 94.00105.00 116.00 1152.0 4.010.107 X P6SMB120A P6SMB120CA 120A120C 102.00 114.00126.00 1165.0 3.710.107 X P6SMB130A P6SMB130CA 130A130C 111. 0 0 124.00137.00 1179.0 3.410.107 X P6SMB150A P6SMB150CA 150A150C 128.00 143.00158.00 1207.0 2.910.108 X P6SMB160A P6SMB160CA 160A160C 136.00 152.00168.00 1219.0 2.810.108 X P6SMB170A P6SMB170CA 170A170C 145.00 162.00179.00 1234.0 2.610.108 X P6SMB180A P6SMB180CA 180A180C 154.00 171.00189.00 1246.0 2.510.108 X P6SMB200A P6SMB200CA 200A200C 171.00 190.00210.00 1274.0 2.210.108 X P6SMB220A P6SMB220CA 220A220C 185.00 209.00231.00 1328.0 1. 910.110 X P6SMB250A P6SMB250CA 250A250C 214.00 237.00263.00 1344.0 1. 810.110 X P6SMB300A P6SMB300CA 300A300C 256.00 285.00315.00 1414.0 1. 510.110 X P6SMB350A* P6SMB350CA* 350A350C 300.00 332.00368.00 1482.0 1. 710.112 X P6SMB400A* P6SMB400CA* 400A400C 342.00 380.00420.00 1548.0 1. 510.112 X P6SMB440A* P6SMB440CA* 440A440C 376.00 418.00462.00 1602.0 1. 410.112 X P6SMB480A* P6SMB480CA* 480A480C 408.00 456.00504.00 1658.0 1. 310.112 X P6SMB510A* P6SMB510CA* 510A510C 434.00 485.00535.00 1698.0 1. 210.112 X P6SMB530A* P6SMB530CA* 530A530C 451.00 503.50556.50 1725.0 1. 210.112 X P6SMB540A* P6SMB540CA* 540A540C 460.00 513.00567.00 1740.0 1. 110.112 X P6SMB550A* P6SMB550CA* 550A550C 468.00 522.50577.50 1760.0 1. 110.112 X P6SMB600A* P6SMB600CA* 600A600C 512.00 570.00630.00 1828.0 1. 010.112 - For bidirectional type having V R of 10 volts and less, the I R limit is double. For stack-die parts, use * to label the part number. Surface Mount – 600W > P6SMB series TVS Diodes © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/28/20 Voltage Transien ts Time Vo ltage Acro ss TV S Current Through TV S Voltage or Current I-V Curve Characteristics Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 2 - Peak Pulse Power Rating Figure 1 - TVS Transients Clamping Waveform VcV BRVR IRIT Ipp V Uni-directional VF VcV BRVR IRIT Ipp V Vc VBR VR Ipp IRIT Bi-directional PPPM Peak Pulse Power Dissipation -- Max power dissipation (V C * IPP) V R Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation V BR Breakdown Voltage -- Maximum voltage that flows though the TVS at a specified test current (I T) V C Clamping Voltage -- Peak voltage measured across the TVS at a specified Ippm (peak impulse current) I R Reverse Leakage Current -- Current measured at V R VF Forward Voltage Drop for Uni-directional td-Pulse Width (ms) PPPM -Peak Pulse Power (kW ) 0.11 10 100 0.0010 .010 .1 11 0 stacked-die, 800W at 10/1000 µs, 25°C Si ng le di e,600W at 10/1000 µs, 25°C T J initial = T AMB Surface Mount – 600W > P6SMB series TVS Diodes © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/28/20 IPPM- Peak P ulse Cur rent, % I RSM 0 0 50 10 0 15 0 1.0 2.0 3.04.0 t r =1 0μsec Peak  Value I PPM IPPM2 T J=25°C P ulse Width(td) is defined as the point where the peak cur rent decays to 50% of I PPM 10/1 000µsec. Waveform as defined by R.E.A t d t-T ime (ms) Half Value I PPM ( ) Uni- dire onal Bi -d irecna l V= VR Uni- dire onal V= 0V Bi-d irec na l V=0V 1. 00 10. 00 100. 00 1000. 00 10000. 00 1.00 10.00 100.00 1000.00 Cj(pf) VBR—R everse Br ea kdow n Volt age(V) Figure 3 - Peak Pulse Power Derating Curve Figure 4 - Pulse Waveform Figure 5 - Typical Junction Capacitance Figure 6 - Typical Transient Thermal Impedance 0 20 40 60 80 100 120 11 0100 Numb er of Cy cles at 60 Hz IFSM - Peak Forward Surge Current (A) Figure 7 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Only Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued) 0% 20% 40% 60% 80% 100% 02 550751001251 50175 Peak Pluse Power(PPP) or Current(IPP) Derating in Percentage % TJ Initial Junction Temperature(˚C) SMF5.0 ~ SMF100 SMF110 ~ SMF250 0.1 1. 0 10.0 100. 0 0.01 .02.03 .04.05 .06.07 .08.09 .0 IF-Peak Fo rward Cu rrent(A ) VF-Pe ak Fo rward Vo ltag e(V) Stac ke d-di e Sing le di e Figure 8 - Peak Forward Voltage Drop vs Peak Forward Current (Typical Values) 0.11 10 100 10000. 001 0.01 0.11 10100 1000 Tran sien t Th erma l Im pedance (°C/ W) T -Pulse Du rati on (s)P Surface Mount – 600W > P6SMB series TVS Diodes © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/28/20 Physical Specifications Weight0.003 ounce, 0.093 grams Case JEDEC DO214AA. Molded plastic body over glass passivated junction Polarity Color band denotes cathode except for bidirectional versions Terminal Matte Tin-plated leads, Solderable per JESD22-B102 Soldering Parameters T emperature (T) T ime (t) Ts(min) Ts(max) TL TP tsPreheat tL tp Ramp-up Critical Zone T L to  TP Ramp-down t 25˚C to Peak 25˚C Reflow Condition Pb-Free assembly Pre Heat - Temperature Min (T s(min) ) 150°C - Temperature Max (T s(max) ) 200°C - Time (min to max) (t s) 60 – 120 secs Average ramp up rate (Liquidus Temp (T L) to peak 3°C/second max T S(max) to T L - Ramp-up Rate 3°C/second max Reflow - Temperature (T L) (Liquidus) 217°C - Time (min to max) (t L) 60 – 150 seconds Peak Temperature (T P) 260 +0/-5 °C Time within 5°C of actual peak Temperature (t p) 30 seconds Max Ramp-down Rate 6°C/second Max Time 25°C to peak Temperature (T P) 8 minutes Max. Do not exceed 260°C Dimensions Environmental Specifications High Temp.  StorageJESD22-A103 HTRB JESD22-A108 Temperature Cycling JESD22-A104 MSL JEDEC-J-STD-020, Level 1 H3TRB JESD22-A101 RSH JESD22-A111 (all dimensions in mm) IL K J Solder Pads AD E GF HC B Cathode Band (for Uni-directional products only) DO-214AA (SMB J-Bend) Dimensions Inches Millimeters Min Max MinMax A 0.0760.086 1.9302.200 B 0.1600.1874.060 4.750 C 0.1300.1553.300 3.940 D 0.078 0.1031.9902.610 E 0.030 0.060 0.760 1.520 F -0.008 -0.203 G 0.2050.220 5.2105.590 H 0.006 0.0120.152 0.305 I 0.089 -2.260 - J 0.085 -2.160 - K -0.107 -2.740 L 0.085 -2.160 - Surface Mount – 600W > P6SMB series TVS Diodes © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/28/20 Part Numbering System VBR Voltage Bi-Directional5% VBR V oltage T olerance Series P6SMB XXXCA Part Marking System Packaging Part number Component Package Quantity Packaging Option Packaging Specification P6SMBxxxXX DO-214AA3000Tape & Reel - 12mm tape/13” reel EIA STD RS-481 Tape and Reel Specification 0.47 (12.0) 0.315(8.0) 0.157 (4.0) 0.49 (12.5) 0.80 (20.2) Arbor Hole Dia. 13.0 (330) Dimensions are in inches (and millimeters). Direction of Feed 0.059 DIA (1.5) Cover tape Cathode F XXYMXXX Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Littelfuse Logo Cathode Band(for uni-directional products only) Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each p\�roduct selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Not\�ice at www.littelfuse.com/disclaimer-electronics. Surface Mount – 600W > P6SMB series TVS Diodes chipmall Electronics Littelfuse:   P6SMB540  P6SMB300  P6SMB170A  P6SMB400C  P6SMB68A  P6SMB13A  P6SMB350C  P6SMB24CA  P6SMB10C  P6SMB56C  P6SMB220  P6SMB62C  P6SMB75CA  P6SMB39CA  P6SMB47  P6SMB250C  P6SMB120C   P6SMB51A  P6SMB91  P6SMB110CA  P6SMB20A  P6SMB220CA  P6SMB6.8C  P6SMB27A  P6SMB15  P6SMB530   P6SMB18  P6SMB82  P6SMB36A  P6SMB120CA  P6SMB22A  P6SMB480  P6SMB56CA  P6SMB68C  P6SMB30A  P6SMB10  P6SMB180  P6SMB16  P6SMB510A  P6SMB8.2  P6SMB15CA  P6SMB300CA  P6SMB9.1A  P6SMB110  P6SMB400CA  P6SMB56  P6SMB18CA  P6SMB150CA  P6SMB180CA  P6SMB8.2CA  P6SMB75  P6SMB27C  P6SMB12CA  P6SMB30CA  P6SMB39A  P6SMB12  P6SMB550  P6SMB47CA  P6SMB12C  P6SMB180C  P6SMB530A  P6SMB150  P6SMB36C  P6SMB200A  P6SMB6.8CA  P6SMB100C  P6SMB82A  P6SMB8.2C  P6SMB43A  P6SMB22CA  P6SMB100A  P6SMB480A  P6SMB100CA  P6SMB540CA  P6SMB160A  P6SMB160CA  P6SMB200CA  P6SMB7.5  P6SMB170C  P6SMB160C  P6SMB350CA  P6SMB43CA  P6SMB24A  P6SMB13  P6SMB200C  P6SMB13C  P6SMB6.8  P6SMB7.5C  P6SMB68CA  P6SMB47A  P6SMB43C  P6SMB33A  P6SMB110C   P6SMB550C  P6SMB9.1C  P6SMB110A  P6SMB250CA  P6SMB18A  P6SMB540A  P6SMB51C P6SMB47CA